How to Make Basketball Shorts Smaller

Whether your shorts are too large or you’ve simply outgrown them, there are a few things you can do to make your basketball shorts smaller. This is especially important if you’re in a growth spurt and all your clothes seem to be swallowing you whole. Luckily, with a little bit of know-how and some basic sewing supplies, you can take in your shorts so they fit snugly and comfortably once again.

  • Decide how much you want to take in the shorts
  • Measure from the side seam to where you want the new seam to be
  • Cut along the measured line
  • Sew a new seam at the cut edge

How To Alter Your Large Shorts / Pants To Be Smaller – Quick and Easy DIY

How Do You Make Big Basketball Shorts Smaller?

There are a few ways to make big basketball shorts smaller. One way is to simply fold them in half and then sew or tie them together at the waist. This will take in the excess fabric and make the shorts fit snugger around your hips.

Another way is to cut off the excess fabric from the bottom of the shorts. You can also use fabric tape or elastic to cinch in the waistband of the shorts.

How Do You Make Shorts Smaller?

Assuming you mean how to make shorts smaller in general and not a specific pair of shorts: There are a few ways to make shorts smaller. One way is to simply hem the bottom of the shorts so they are shorter.

Another way is to use fabric tape or iron-on patches on the inside of the legs at the seam to take in some fabric and make the legs narrower. You can also try taking in the sideseams slightly. If you have a bit more experience with sewing, you could also try taking in the darts at the waistline.

How Can I Make My Gym Shorts Tighter?

If your gym shorts are too loose, there are a few things you can do to make them tighter. First, try washing them in hot water and then drying them on high heat. This will usually shrink most fabrics.

If that doesn’t work, or if you don’t want to risk shrinking your shorts, you can try sewing a new seam along the waistband. Make sure to use a strong thread and stitch slowly so the stitches don’t come out easily. You could also try using safety pins to cinch the waistband of your shorts.

Finally, if all else fails, you can always buy new gym shorts that fit better!

Why Did Basketball Shorts Get Baggy?

The first thing to note is that baggy basketball shorts are a relatively new phenomenon. They became popular in the 1990s, and they were initially seen as a way to rebel against the more traditional, tight-fitting shorts that had been the norm up to that point. The baggier style of shorts allowed players to have more freedom of movement on the court, and they also looked cooler than their tighter-fitting counterparts.

There are a few theories as to why baggy basketball shorts became so popular in the 1990s. One theory is that it was simply a fashion trend that caught on among young people at the time. Another theory is that Michael Jordan popularized the style after he started wearing them during his legendary NBA career.

Regardless of the reason, baggy basketball shorts are now considered standard attire for most players in the league.

How to Make Basketball Shorts Smaller

How to Make Shorts Smaller around the Thighs

If you find that your shorts are too loose around the thighs, there are a few easy ways to make them fit better. First, try simply cinching the waistband with a belt. If that doesn’t provide enough of a snug fit, you can try taking in the sides of the shorts by sewing darts or gathering the fabric with elastic.

Finally, if your shorts are still too loose, you can always try wearing tights or leggings underneath to create a more flattering silhouette.

How to Make Shorts Smaller around the Waist

Summertime is the perfect season to break out your cutest shorts! But sometimes, even when you find a pair of shorts that fit everywhere else, they can be just a little too loose around the waist. If this is the case for you, there’s no need to worry—there are a few easy ways to make your shorts smaller around the waist so that they fit perfectly.

First, try cinching your shorts with a belt. This is an easy way to take up some excess fabric and create a more fitted look. If you don’t have a belt handy, you can also try knotting the fabric at the waist.

This method works best with shorter shorts; if your shorts are long enough, you can also roll them up at the waist for a similar effect. If your shorts are made of stretchy material, another option is to simply sew or safety pin them in place so that they hug your body better. This will give you a more customized fit and prevent the fabric from stretching out over time.

Finally, if all else fails, you can always get your shorts professionally altered. This may seem like an extreme solution, but it’s actually quite common—and it’s worth it if it means getting a perfect fit. Just remember: when in doubt, go smaller rather than larger so that you can always adjust as needed.

With these tips in mind, enjoy showing off those legs all summer long!

How to Make Shorts Smaller around the Waist Without Sewing

Are you in love with a pair of shorts but they’re just a little too big around the waist? If so, don’t despair! There are several ways to make them smaller without having to sew.

Here are a few tips:

1. Use safety pins: This is probably the easiest way to take in a pair of shorts. Simply put on the shorts and cinch them together at the waist with one or two safety pins. Voila! Instant custom fit.

2. Use a rubber band: If you don’t have any safety pins handy, a rubber band can also do the trick. Again, put on the shorts and wrap a rubber band around the waistband, pulling it as tight as you need to get the desired fit.

3. Use a belt: Another quick and easy way to make your shorts smaller is to simply wear them with a belt cinched tightly at the waist. This will give you an instant fitted look. Plus, it’s a great way to accessorize!

4. Alter them permanently: If you want to make your shorts smaller for good, then you’ll need to sew them. But don’t worry, it’s not as difficult as it sounds.

First, put on the shorts and mark where you want them taken in with chalk or another removable marker. Then, take them off and sew along those lines using a sewing machine or needle and thread (if doing it by hand). Be sure to try on the shorts again after altering them to ensure they fit properly before hemming up the new seam Allowance.

How to Make Shorts Smaller Without Sewing

How to Make Shorts Smaller Without Sewing

Are you in love with a pair of denim shorts but they’re just a little too big? You don’t have to throw them out or take them to a tailor – there are a few things you can do to make your shorts smaller without sewing. First, try cinching the waist with a belt.

If that doesn’t give you the fit you want, try knotting the front of the shorts at the waistband. For both of these options, make sure you leave enough slack so that you can still breathe and sit down comfortably! If your shorts are made from a lighter fabric like linen or cotton, you can also try shrinking them in the wash.

Just put them in hot water and let them soak for about 30 minutes before washing them as usual. Be warned that this method isn’t always reliable and could end up making your shorts too small, so only do it if you’re willing to risk it! Finally, if all else fails, you can always take them up yourself with a needle and thread.

It’s not as hard as it sounds – just follow along with this tutorial and you’ll have perfectly fitting shorts in no time.

How to Make Shorts Tighter With Hair Tie

If you’re like me, you love the look of tight shorts on a guy. But sometimes, finding a pair that fits just right can be a challenge. Luckily, there’s an easy way to make any pair of shorts tighter and more form-fitting – all you need is a hair tie!

Here’s how it works:

1. Put on the pair of shorts that you want to tighten up.

2. Take a hair tie and loop it around the waistband of the shorts, in the front.

3. Cross the two ends of the hair tie in the back, and pull them tight. You may need to adjust the position of the hair tie until you get the desired level of tightness.

4. Rock your new, tighter-fitting shorts with confidence!

How to Make Shorts Shorter Without Cutting Or Sewing

How to Make Shorts Shorter Without Cutting Or Sewing

Are you in love with a pair of shorts but they’re just too long? Or maybe you bought them that way on purpose, thinking you’d eventually get around to altering them. Well, there’s no need to wait any longer!

You can make your shorts shorter without cutting or sewing in just a few minutes using items you probably already have at home. All you need is a pair of scissors and some clear nail polish. First, put on the shorts and mark where you want them to fall (this will be different for everyone depending on how short you want them).

Then, take them off and lay them flat. Using the scissors, carefully cut small slits along the marked line – be sure not to cut too much or too deeply, as you’ll only be able to shorten them so much before they become unusable. Finally, apply clear nail polish to the raw edges of the newly-cut slits.

This will help prevent fraying and keep your new hemline looking neat and tidy. That’s it! In just a few minutes time, you’ve altered your shorts without having to break out the sewing machine or needle and thread.

How to Make Athletic Shorts Tighter

A lot of people have trouble with their athletic shorts being too loose. If this is a problem you’re facing, there are a few things you can do to make your shorts tighter. First, try wearing a belt.

This will help to cinch in the waist and prevent the shorts from falling down. Another option is to buy a pair of shorts that has an adjustable waistband. This way, you can tighten or loosen the waistband as needed.

Finally, if all else fails, you can always take in the seams of your shorts to make them smaller.

How to Make Shorts Longer Than 15 Seconds

If you’re anything like me, you love a good pair of shorts. But sometimes, you find yourself in a situation where your favorite pair of shorts is just too darn short.

Here’s how to make them work for you:

1) Get yourself a pair of safety pins.

2) Pin the hem of your shorts up along the sides, so that they are effectively lengthened by an inch or two.

3) Voila!

You now have a pair of longer shorts that will still show off your beautiful legs.

Conclusion

If you have a pair of basketball shorts that are too large, there is an easy way to make them smaller. All you need is a needle and thread. First, fold the waistband of the shorts in half and pin it in place.

Then, sew a new seam along the pinned edge. This will take in the excess fabric and make the waistband smaller. Finally, try on the shorts to see if they fit better.

If they’re still too loose, repeat this process until they’re the right size.

Related Post: